Home > Knowledge > Content
Learn the most comprehensive aluminum knowledge.
- Oct 25, 2018 -

Read the "Aluminum Family" in a minute! Learn the most comprehensive knowledge of aluminum.

Aluminum ingots are classified into high-purity aluminum ingots, aluminum alloy ingots and remelting aluminum ingots according to their composition; they can be divided into round ingots, ingots, ingots, T-shaped ingots, etc. according to their shape and size.

Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon. Aluminum has a low density and is called a light metal. Aluminum is a non-ferrous metal with high production and use, which is second only to steel in the world. The density of aluminum is about 1/3 of the density of steel and copper. Because aluminum is light in weight, it is often used in manufacturing, trains, subways, automobiles, airplanes, ships, rockets, and other land, sea and air vehicles to reduce the load by increasing its own weight. Similarly, aluminum is also prominent in military products.

Alumina, also known as aluminum oxide, is in the form of a white powder. The primary aluminum is a liquid aluminum liquid which is taken out during the electrolysis process and is not subjected to precipitation or the like. The primary aluminum can be turned into an aluminum ingot by being cooled in the body of the cast aluminum ingot model. Therefore, alumina is the raw material for the aluminum liquid, electrolytic aluminum is the process, primary aluminum is the aluminum liquid in the electrolysis process, and aluminum ingot is an aluminum product, which is finally sold in the market.

Electrolytic aluminum is aluminum obtained by electrolysis. Electrolytic aluminum is a method of smelting metallic aluminum, which is usually decomposed into metallic aluminum by a large current in an electrolytic cell. The modern electrolytic aluminum industry uses cryolite-alumina melting salt electrolysis. The molten cryolite is a solvent, the alumina is used as a solute, the carbon body is used as an anode, and the aluminum liquid is used as a cathode. After a strong direct current is applied, an electrochemical reaction is performed on the two poles in the electrolytic cell at 950 ° C to 970 ° C. Both electrolysis.

Copyright © Only Fluorine Chemicals. All Rights Reserved.